adrain system uses a stainless steel sink basket connected to the sink basin.  full height turnstile sink basket flange cover plate 4 inches wide at the bottom of the sink drain hole, and then the transition to 12-inch threaded holes in the body of the basket. The attention of the drainage system, 12-inch hole. 12 inches of the hole at the bottom of the cross members to prevent food particles or other debris falling into the drain pipe. Remove the stainless steel sink basket, open the hole of a garbage disposal basin.

1 removed from below the sink cabinet.

2 Loosen the slip nut to slip the tail of the section clamps and drainage systems. Tail to connect the stainless steel sink basket 12 inches of thread.

3Grip waist high turnstile the tail with one hand and lifted it to connect to a. One-on-tail at the bottom of the single-basin sink P-trap, or double-basin sink, T-joint, or extended to elbow into a sleeve.

4 Push the blade of the sink basket 12 inches of the hole set of needle nose pliers. Positioning the basket cross member between the pair of pliers, blade.

5 to seize the sink basket to a basket filter wrench or large-scale joint sliding clamp nut. Tighten the nut rotation to the basket 4 inches wide thread. Strengthen the lock nut on the bottom of the sinking of the basin.

6 stainless steel sink basket remained the needle nose pliers and baskets filter spanner or large joint slip clamp locking nut loose.

7 Remove the locknut to sink baskets. waist high turnstile promote basket Basin drainage holes.